Sawing Methods

Posted April 26, 2012 by | Leave a Comment »
In addition to the specific features of each wood species, sawing methods* can create a wide variety of visual effects. The most common methods are plain sawing, quarter sawing, and rift sawing.* None of these sawing methods can guarantee the same results on 100% of boards.Hardwood Sawing Method 1Plain sawnThe plain sawing method is the most common. It consists of sawing boards off the log in strips parallel to the pith. These boards are then sawn lengthwise again. Every board sawn this way has a unique appearance. Floors made with plain sawn boards have greater color and pattern variations than floors made with boards sawn using other methods.
Hardwood Sawing Method 2Quarter sawnAs the name implies, the quarter sawing method starts by sawing the log into quarters. Boards are then sawn off the top parts of the faces of each quarter, cutting through the growth rings at about a 90 degree angle. This method usually produces fairly uniform boards with similar grain patterns*.* These patterns are created by the rings of the oak.
Hardwood Sawing Method 3Rift sawn If we continue sawing boards off the faces of the quartered log, we get rift sawn boards, which are differentiated by the fact that the growth rings on the outer edge of the log are different from those nearer the pith. The grain on the top of the board wi ll be linear, while the grain on the ends will be somewhat slanted.Article courtesy of Mirage Floors

Comments are closed.

Kashian Bros on Angie's List Make It Better Best of Flooring Kashian Bros on BBBKashian Bros on Yelp